Logo

MonoCalc

/

Percent Ionization Calculator

Chemistry

Species

Accepts 0.1, 1.8e-5 or 1.8×10^-5
Common ion e.g. from NaA, in M. Leave blank for none.

Values are for 25 °C. Ka values themselves depend on temperature; enter the constant for your temperature if it differs. For a polyprotic acid, enter Ka₁ to get the ionization of the first proton; use the pH calculator for full speciation.

Percent ionization

1.333 %

Exact quadratic solution

"x is small" approximation: 1.342 % using x ≈ √(K·C₀)

5 % rule: approximation valid

Ionized (A⁻ + H⁺)

Still HA

≈ 13 of every 1,000 weak acid molecules are ionized.

x (HA ionized)
0.001333 M
[HA]eq
0.09867 M
[H⁺]
0.001333 M
[A⁻]eq
0.001333 M
pH
2.875
pOH
11.125
Fraction un-ionized
98.67 %

% ionization vs. initial concentration

The dot marks your solution. Moving left (more dilute) raises % ionization; the dashed curve is the "x is small" shortcut, which overshoots once x is no longer small.

ICE table and steps

[HA][H⁺][A⁻]
I0.100000
C−x+x+x
E0.098670.0013330.001333

Concentrations in mol/L.

  1. Ka = [H⁺][A⁻] / [HA] = x(x) / (0.1000 − x) = 1.800 × 10⁻⁵
  2. x² + (Ka + s)·x − Ka·C₀ = 0 → x² + 1.800 × 10⁻⁵·x − 1.800 × 10⁻⁶ = 0
  3. x = 2·Ka·C₀ / (b + √(b² + 4·Ka·C₀)), b = Ka + s → x = 0.001333 M
  4. % ionization = x / C₀ × 100 = 0.001333 / 0.1000 × 100 = 1.333 %

Related: pH Calculator · Ka & pKa Converter · ICE Table Calculator · Henderson–Hasselbalch (buffers) · Molar Conductivity (α from conductivity)

About This Tool

Percent Ionization Calculator – How Much of a Weak Acid or Base Really Ionizes

A weak acid only partly ionizes in water, and percent ionization tells you how large that part is. This calculator finds the percent ionization of any monoprotic weak acid or weak base from its Ka, pKa, Kb or pKb, works backwards from a measured pH, or finds the concentration you need to reach a target percentage. It also charts how the percentage changes with dilution, checks the 5 % rule and shows the common-ion effect.

The percent ionization formula

For a weak acid HA and a weak base B the definitions are:

% ionization = [A⁻] formed / [HA]₀ × 100      HA ⇌ H⁺ + A⁻
% ionization = [BH⁺] formed / [B]₀ × 100     B + H₂O ⇌ BH⁺ + OH⁻

If x is the amount that ionizes and C₀ the starting concentration, the ICE table gives Ka = x² / (C₀ − x), a quadratic in x. The calculator solves it with the numerically stable root

x = 2·K·C₀ / (b + √(b² + 4·K·C₀)),   b = K + s

where s is any conjugate base (or conjugate acid) already present. This form gives the same answer as the familiar (−b + √(b² + 4KC₀)) / 2 but does not lose precision for very dilute solutions or acids with Ka larger than the concentration.

Why dilution increases percent ionization

One of the most surprising results in acid–base chemistry is that a weak acid ionizes more as it becomes more dilute. Using the shortcut x ≈ √(Ka·C₀), percent ionization is about 100·√(Ka / C₀), so it rises as C₀ falls. For acetic acid (Ka = 1.8 × 10⁻⁵), 0.10 M is about 1.3 % ionized, 0.0010 M about 12.6 % and 1.0 × 10⁻⁵ M about 72 %. This is Ostwald's dilution law, a consequence of Le Chatelier's principle: dilution lowers the product of the ion concentrations more than it lowers [HA], so the equilibrium shifts toward the ions. The chart in the tool plots this curve around your concentration, and the dot marks your solution.

The 5 % rule and when the shortcut fails

Textbooks often drop x from C₀ − x to avoid the quadratic. The 5 % rule says this is acceptable if the resulting percent ionization is 5 % or less. The calculator always solves the exact equation, shows the approximate value beside it, and labels the approximation valid or invalid with its relative error. In very dilute solutions the shortcut can even predict more than 100 % ionization, which is physically impossible; those values are shown struck through.

Tip
The dashed curve on the chart is the shortcut and the solid curve is the exact solution. Where they separate is exactly where the 5 % rule stops holding.

The common-ion effect

Adding the conjugate base (for example sodium acetate to acetic acid) pushes the equilibrium back toward HA. With 0.10 M acetate present, 0.10 M acetic acid is only about 0.018 % ionized instead of 1.3 %. Enter the conjugate concentration in the optional field to see this; the chart then also draws the no-common-ion curve for comparison. Mixtures like this are buffers, which the Henderson–Hasselbalch equation describes.

Working backwards: from pH or to a target percentage

In From measured pH mode, [H⁺] = 10−pH is the amount ionized, so the percentage follows directly, and the tool back-calculates Ka = x² / (C₀ − x) and pKa. In Concentration for a target % mode it rearranges the equilibrium to C₀ = Ka(1 − α) / α², where α is the target fraction, and checks the answer by solving forward again.

Very dilute and very weak solutions

When Ka·C₀ is comparable to Kw = 1.0 × 10⁻¹⁴, water itself supplies a meaningful share of the H⁺ or OH⁻. Ticking Include water autoionization replaces the quadratic with the full charge balance, solved numerically. For 1.0 × 10⁻³ M phenol (Ka = 1.0 × 10⁻¹⁰), this lowers the percent ionization from 0.0316 % to 0.0301 %.

Assumptions
Results are for 25 °C and use concentrations rather than activities, which becomes less accurate above about 0.1 M. Ka and Kb themselves change with temperature, so enter the constant measured at your temperature.

Frequently Asked Questions

Is the Percent Ionization Calculator free?

Yes, Percent Ionization Calculator is totally free :)

Can I use the Percent Ionization Calculator offline?

Yes, you can install the webapp as PWA.

Is it safe to use Percent Ionization Calculator?

Yes, any data related to Percent Ionization Calculator only stored in your browser (if storage required). You can simply clear browser cache to clear all the stored data. We do not store any data on server.

How does this percent ionization calculator work?

It sets up the ICE table for HA ⇌ H⁺ + A⁻ (or B + H₂O ⇌ BH⁺ + OH⁻), solves the equilibrium quadratic exactly with a numerically stable root, and reports 100 × x / C₀. It can also work backwards from a measured pH, or find the concentration that gives a target percentage.

Why does percent ionization increase when the solution is diluted?

Diluting lowers the concentrations of the ions more than the equilibrium expression allows, so the equilibrium shifts toward more ionization (Le Chatelier's principle, also known as Ostwald's dilution law). The amount of H⁺ still falls, but the fraction of the acid that ionizes rises.

What is the 5 % rule?

The shortcut x ≈ √(K·C₀) assumes x is negligible next to C₀. If the approximate percent ionization is 5 % or less the shortcut is accepted; above that the full quadratic should be used, and the calculator shows how large the error is.

How does a common ion change percent ionization?

Adding the conjugate base (for example sodium acetate to acetic acid) pushes the equilibrium back toward the un-ionized acid, so percent ionization drops sharply. Here the percentage is still x / C₀, the share of the acid that ionized, not the total conjugate concentration divided by C₀.

When should I include water autoionization?

Only for very dilute or very weak acids and bases, roughly when K·C₀ is below 20 × Kw or C₀ is below 10⁻⁶ M. In those cases water's own H⁺ or OH⁻ is comparable to what the solute produces, and the calculator solves the full charge balance instead of the quadratic.

What are the limitations of these results?

Values assume 25 °C (Kw = 1.0 × 10⁻¹⁴), a monoprotic acid or base, and concentrations in place of activities, which is less accurate above about 0.1 M. For a polyprotic acid, entering Ka₁ gives the ionization of the first proton only.